Access Scanners

Access Control Hardware - Access Control WalesEasy to use Access Control Hardware

Our Access controllers can be networked together to create a powerful computer controlled security infrastructure. The T3510 can be configured in many different arrangements, controlling a smaller number of doors at first and then more at a later date as need and/or budget permits.

As the security network grows and requires more control points, further T3510’s are installed, working side by side within the same network. This “building block” approach is the most cost effective way to install Access Control

The T3510 has a volt-free input that can be wired directly into your fire alarm system. When the alarm is activated, all doors immediately open for a quick and safe evacuation of personnel. Simultaneously, a Fire Roll Call report is printed on a remote, secure serial printer.

The modem facility within the T3510 provides a simple system at a remote geographical location where there is only power and a phone line.

Installing a T3510 provides a platform for installing other Tensor products such as Time & Attendance, Visitor Monitoring, Automatic Number Plate recognition and Digital CCTV.

The T351x range are the ultimate Smart Card Access Control units for doors, car park barriers and turnstiles.


T351x Access Control Scanner Controllers

The T351x range achieves the same standard of security throughout, catering for those who require access control, whether it be a single door up to a four door system controller. Starting from an incredibly low price of just £119.00 for the controller and software, which represents the best door access security you can buy for the money!

Scanner Controller can support up to multipule access control points. Each access control point has the following connections available:

  • Output to door This is the relay connection to the door lock
  • Door loop sensor This is a link to a sensor that detects when the door opens
  • Alarm This is a link to either a fire or burglar alarm
  • Momentary switch This is a link to a switch that is only active when pressed
  • Timed switch This is a link to a switch that is active for a specified time after it has been pressed
  • Tamper Input This link will detect when the access control equipment has been opened
  • Override This link will provide an override facility to the normal access security settings via an attached override button